Product Categories
Product Center
This full stroke chuck is specially designed for laser pipe cutting equipment. The full stroke chuck itself can be used as an independent rotating spindle, with a chuck in the middle that can firmly clamp the workpiece and rotate at the same time. Full stroke chuck can realize fast clamping and unclamping by rotating air intake from the side. , Disconnect the air source before working. After the laser pipe cutting full stroke main chuck base is fixed, only the matching motor and gear connection are needed, and the compressed air source (0.1-0.9MPA) can be connected to clamp the workpiece and drive the workpiece to rotate.
The chuck works in full stroke, without additional adjustment of the four-jaw position, and can clamp a full range of applicable pipe fittings, improving production efficiency. The full stroke chuck adopts a fully enclosed structure, which has better stability and wear resistance. It is equipped with cross roller bearings and has a long service life. The rotation accuracy and repeat positioning accuracy are higher than that of traditional laser chucks, and the clamping force is greater than that of similar products in the market. In the case of low air pressure, a smaller clamping force can be obtained to meet the requirements of thin-walled pipe fittings. Processing.
This full stroke chuck is widely used in pipe processing machine tools such as dedicated laser pipe cutting machines.
型号 | 爪行程/直径 mm | 最大夹紧力KN | 许用压力MPa | 极限转速r/min | 夹紧范围mm | 中心高mm | 转动惯量Kg.m2 Rotational inertia | 转动部分重量
Kg | 整机重量Kg |
G400C-170 | 165 | 1.36( 0.5MPA) | 0.1-0.9 | 150 | φ0-170 | 280 | 3.95 | 128.5 | 210 |
G500C-225 | 200 | 1.6(0.5MPA) | 0.1-0.9 | 130 | φ0-225 | 315 | 6.1 | 140 | 240 |
G500DC-230 | 220 | 2.7 ( 0.5MPA) 4.86( 0.9MPA) | 0.1-0.9 | 15 | φ25-225 | 315 | 6.1 | 140 | 240 |
规格 | A | B | B1 | C | D | E | F | G | H | I | J | K | L | M | N | O | P | Q | R | S |
G400C-170 | 600 | 280 | 590 | 602 | 100 | 60 | 570 | 273 | 170 | 235 | 250 | 400 | / | / | / | 10 | / | / | 8-M8 | 18X21 |
G500C-225 | 670 | 315 | 694 | 672 | 100 | 60 | 640 | 273 | 225 | 235 | 250 | 400 | / | / | / | 10 | / | / | 8-M8 | 18X21 |
G500DC-230 | 670 | 315 | 694 | 672 | 100 | 60 | 640 | 273 | 225 | 235 | 250 | 400 | / | / | / | 10 | / | / | 8-M8 | 18X21 |