Product Categories
Product Center
This product is designed for laser pipe cutting equipment. The product itself can be used as an independent rotating spindle with a barrel chuck that can firmly clamp the workpiece while rotating. It can be quickly clamped and loosened by rotating air intake from the side. Open action.
After the product base is fixed, only the matching motor and gear connection are needed, and the compressed air source (0.4-0.9Mpa) can be connected to clamp the workpiece and drive the workpiece to rotate.
The clamping seat clamps the workpiece quickly and the production efficiency is high. High rotation accuracy and repeat positioning accuracy.
Equipped with full-wrapped jaws to clamp the workpiece, which can meet the processing of thin-walled pipe fittings. This product is widely used in the rapid clamping and rotating system of pipe processing machine tools such as laser pipe cutting machines.
型号 | 爪行程/直径 mm | 最大夹紧力KN | 许用压力MPa | 极限转速r/min | 夹紧范围mm | 中心高mm | 转动惯量 Kg.m2 | 转动部分重量
Kg | 整机重量Kg |
G63TJ | 4.6 | 5.4KN/0.5Mpa | 0.4-0.9 | 500 | 50-63 | 130 | 0.12 | 23 | 33.8 |
G100TJ | 4.6 | 10KN/0.5Mpa | 0.4-0.9 | 500 | 80-100 | 200 | 0.9 | 72 | 95 |
G125TJ | 5.7 | 15KN/0.5Mpa | 0.4-0.9 | 500 | 100-125 | 230 | 2.42 | 133 | 175 |
规格 | A | B | B1 | C | D | E | F | G | H | I | J | K | O | R | S |
G63TJ | 200 | 130 | 230 | 245 | 100 | 70 | 170 | 155 | 50 | 95 | 115 | 190 | 4 | 12-M8 | 4-11 |
G100TJ | 320 | 200 | 340 | 370 | 120 | 90 | 280 | 220 | 80 | 180 | 200 | 290 | 6 | 12-M8 | 4-14 |
G125TJ | 380 | 230 | 410 | 435 | 200 | 150 | 330 | 268 | 100 | 210 | 250 | 356 | 6 | 12-M10 | 4-18 |